Adding a valve to your tank?

24″ Valve Fit Check.

Tell us about your tank and site — this is the same intake a Bristola engineer runs on the call to confirm fit before quoting. The verdict comes back fast: fit confirmed means we can quote it today.

Start the Fit Check About the Entry Portal

Adding a valve to your tank?

24″ Valve Fit Check

Tell us about your tank and site — this is the same intake a Bristola engineer runs on the call to confirm fit before quoting.

All fields marked * are required.

1. Contact & Site

Company *

Contact name & title *

Phone

Site city / state *

Who signs off on this? (economic buyer)

Tanks on site (total) — every one is a future valve

Timeline / why now?

2. Asset Basics

Asset type *

Contents / media *

Capacity (gal) *

Diameter (ft)

Sidewall height (ft)

Operating pressure * (valve rated to 150 psi)

Temperature at tank wall * (valve rated to 176°F)

Aggressive chemistry? (strong acid/caustic, solvents)

Tank currently in service?

Estimated sediment depth (ft)

Last cleaned

3. Tank Construction

Wall material *

Wall thickness (if known)

Tank age (yrs)

Interior coating / liner?

Wall insulated / heat-traced?

Known condition issues (corrosion, leaks, cracks near proposed location)

4. Penetration Point (where the valve goes)

Existing lower sidewall manway / nozzle? *

Flange spec (if existing)

Penetration height above grade * (30″–5 ft is viable)

Can liquid level be dropped below the penetration for install? *

Obstructions within 3 ft of the spot? (mixers, piping, heat coils, rebar)

Spec reminders: 24″ heavy-duty knife gate, stainless body/gate, patented non-clogging resilient seat — built for suspended solids. Class 150 flange, 20 × 1¼″-7 UNC on a 29.5″ bolt circle. Penetration must land 30″–5 ft above grade, and the Bristola entry box needs a clear area 28 ft long × 6 ft wide off the tank manhole.

5. Clearance & Site Access

Clear area off the tank manhole * (entry box needs 28 ft long × 6 ft wide)

Truck / crane access to the tank? *

Water available on site?

Power available on site?

Hazardous area classification? (C1D1 etc.)

Site requirements

Tank blueprints & current manhole configuration (drawings, spec sheets, manhole/manway details)

PDF, DWG, DXF or image files, up to 25 MB each. You can select several at once.

Site pictures & aerial photos (tank overall, manhole close-up, nameplate, access route, aerial view)

JPG, PNG, HEIC or PDF, up to 25 MB each. You can select several at once.

6. Pricing Inputs & The Program

Disposal of removed material handled by

Target install window

Certifications required by the site (affects pricing — check all that apply)

None specified Potable water (NSF/AWWA) Food-grade (FDA/USDA) Oil & gas / API Other (note in Notes)

Certifications change the cleaning price tier — capture them now. Cert status never blocks the valve install: Bristola holds required certifications before the first cleaning, and getting the valve on is step one anyway.

Program interest (check all discussed)

3-yr annual clean-out deal (valve at cost) 5-yr Assurance Program One-time cleaning first Multiple tanks / site rollout

Notes / their words (pain, goals, who else is involved)

Photos requested? (ask for: manway close-up, tank overall, nameplate)

By submitting, you agree to be contacted about your request. We never share your information.

Your request has been submitted!

Thank you — we've received your Valve Fit Check along with any blueprints and photos you attached. A Bristola engineer will review it and reach out shortly.

Or talk it through first

Not sure about a field?

Leave anything blank — a Bristola engineer will fill the gaps with you on a quick call.

Talk to Bristola Back to the Entry Portal